Hackers have found a way to add Controller Pak support to Nintendo Switch Online's N64 collection, available via the premium Expansion Pack tier, allowing players to save certain games and activate other features such as saving time trial ghosts in Mario Kart 64.
As reported by VGC, notable Switch hacker LuigiBlood took to Twitter to explain how to hack N64 Controller Pak support into Nintendo Switch Online, and in so doing, showing that the functionality exists in the emulator's code.
seems like it works just fine pic.twitter.com/rF6Mo1IW7CJanuary 28, 2022
See more
Users on Twitter added that while they could get Controller Pak functionality to work on Nintendo Switch Online's N64 games, the saved data doesn't remain when closing the game. However, the emulator's built-in save state feature did maintain the data for later use.
Unfortunately, the major caveat is that the hack isn't possible on a retail Nintendo Switch. At least, not one that's fresh out of the box. Instead, a modified Switch is required, the setup process of which comes with its own set of risks, including bricking your console. As such, we couldn't recommend the process in good conscience if you're even the least bit risk averse.
The good news, though, is that the hackers' efforts show that Nintendo Switch Online's N64 emulator does indeed have Controller Pak functionality - it's just not currently enabled on the service.
That being said, with additions and improvements coming to the N64 service - such as improved performance for The Legend of Zelda: Ocarina of Time - there's every chance that Nintendo will eventually enable Controller Pak support.
This would be pretty fantastic, as the N64 collection feels a little incomplete without Controller Pak support. Some games, like WinBack: Covert Operations, require Controller Pak support in order to create a save file. The only current option for players in that regard is to create a save state, which gets the job done, but probably isn't what developer Omega Force intended for normal progression in the game.
As mentioned, it would also allow for the saving of ghost data in Mario Kart 64's time trials, a feature that - without the use of hacking - is completely unavailable to Switch Online players at the time of writing.
There's gameplay benefits to this, too, as the enabling of Controller Pak support could breathe some new life into Mario Kart 64's time trial community, which has been kept alive by speedrunners to this day. And ultimately, we'll take anything that makes the wait for Mario Kart 9 that much easier.
Are you a great Chrome user? That’s nice to hear. But first, consider whether or not there are any essential Chrome extensions you are currently missing from your browsing life, so here we're going to share with you 10 Best Chrome Extensions That Are Perfect for Everyone. So Let's Start.
1. LastPass
When you have too several passwords to remember, LastPass remembers them for you.
This chrome extension is an easy way to save you time and increase security. It’s a single password manager that will log you into all of your accounts. you simply ought to bear in mind one word: your LastPass password to log in to all or any your accounts.
Features
Save usernames and passwords and LastPasswill log you in automatically.
Fill the forms quickly to save your addresses, credit card numbers and more.
2. MozBar
MozBar is an SEO toolbar extension that makes it easy for you to analyze your web pages' SEO while you surf. You can customize your search so that you see data for a particular region or for all regions. You get data such as website and domain authority and link profile. The status column tells you whether there are any no-followed links to the page.You can also compare link metrics. There is a pro version of MozBar, too.
3. Grammerly
Grammarly is a real-time grammar checking and spelling tool for online writing. It checks spelling, grammar, and punctuation as you type, and has a dictionary feature that suggests related words. if you use mobile phones for writing than Grammerly also have a mobile keyboard app.
4. VidlQ
VidIQ is a SaaS product and Chrome Extension that makes it easier to manage and optimize your YouTube channels. It keeps you informed about your channel's performance with real-time analytics and powerful insights.
Features
Learn more about insights and statistics beyond YouTube Analytics
Find great videos with the Trending tab.
You can check out any video’s YouTube rankings and see how your own video is doing on the charts.
Keep track the history of the keyword to determine when a keyword is rising or down in popularity over time.
Quickly find out which videos are performing the best on YouTube right now.
Let this tool suggest keywords for you to use in your title, description and tags.
5. ColorZilla
ColorZilla is a browser extension that allows you to find out the exact color of any object in your web browser. This is especially useful when you want to match elements on your page to the color of an image.
Features
Advanced Color Picker (similar to Photoshop's)
Ultimate CSS Gradient Generator
The "Webpage Color Analyzer" site helps you determine the palette of colors used in a particular website.
Palette Viewer with 7 pre-installed palettes
Eyedropper - sample the color of any pixel on the page
Color History of recently picked colors
Displays some info about the element, including the tag name, class, id and size.
Auto copy picked colors to clipboard
Get colors of dynamic hover elements
Pick colors from Flash objects
Pick colors at any zoom level
6. Honey
Honey is a chrome extension with which you save each product from the website and notify it when it is available at low price it's one among the highest extensions for Chrome that finds coupon codes whenever you look online.
Features
Best for finding exclusive prices on Amazon.
A free reward program called Honey Gold.
Searches and filters the simplest value fitting your demand.
Instant notifications.
7. GMass: Powerful Chrome Extension for Gmail Marketers
GMass (or Gmail Mass) permits users to compose and send mass emails using Gmail. it is a great tool as a result of you'll use it as a replacement for a third-party email sending platform. you will love GMass to spice up your emailing functionality on the platform.
8. Notion Web Clipper: Chrome Extension for Geeks
It's a Chrome extension for geeks that enables you to highlight and save what you see on the web.
It's been designed by Notion, that could be a Google space different that helps groups craft higher ideas and collaborate effectively.
Features
Save anything online with just one click
Use it on any device
Organize your saved clips quickly
Tag, share and comment on the clips
If you are someone who works online, you need to surf the internet to get your business done. And often there is no time to read or analyze something. But it's important that you do it. Notion Web Clipper will help you with that.
9. WhatFont: Chrome Extension for identifying Any Site Fonts
WhatFont is a Chrome extension that allows web designers to easily identify and compare different fonts on a page. The first time you use it on any page, WhatFont will copy the selected page.It Uses this page to find out what fonts are present and generate an image that shows all those fonts in different sizes. Besides the apparent websites like Google or Amazon, you'll conjointly use it on sites wherever embedded fonts ar used.
Similar Web is an SEO add on for both Chrome and Firefox.It allows you to check web site traffic and key metrics for any web site, as well as engagement rate, traffic ranking, keyword ranking, and traffic source. this is often a good tool if you are looking to seek out new and effective SEO ways similarly as analyze trends across the web.
Features
Discover keyword trends
Know fresh keywords
Get benefit from the real traffic insights
Analyze engagement metrics
Explore unique visitors data
Analyze your industry's category
Use month to date data
How to Install chrome Extension in Android
I know everyone knows how to install extension in pc but most of people don't know how to install it in android phone so i will show you how to install it in android
1. Download Kiwi browser from Play Store and then Open it.
2. Tap the three dots at the top right corner and select Extension.
3. Click on (+From Store) to access chrome web store or simple search chrome web store and access it.
4. Once you found an extension click on add to chrome a message will pop-up asking if you wish to confirm your choice. Hit OK to install the extension in the Kiwi browser.
5. To manage extensions on the browser, tap the three dots in the upper right corner. Then select Extensions to access a catalog of installed extensions that you can disable, update or remove with just a few clicks.
Your Chrome extensions should install on Android, but there’s no guarantee all of them will work. Because Google Chrome Extensions are not optimized for Android devices.
Final Saying
We hope this list of 10 best chrome extensions that is perfect for everyone will help you in picking the right Chrome Extensions. We have selected the extensions after matching their features to the needs of different categories of people. Also which extension you like the most let me know in the comment section
from TechCrunch https://ift.tt/OHuy7nkTt
0
coment�rios:
via TechRadar - All the latest technology news https://ift.tt/lGXP5Ou6J
Samsung Galaxy S22 case leak hints at a divisive screen feature
While Samsung Galaxy S22 leaks have totally laid bare the upcoming Android phones, it's easy to miss the small details when given big leaks, and it sometimes takes otherwise-unimportant leaks to get us to notice the little things.
Case in point, hands-on pictures of cases for the entire Samsung Galaxy S22 range have leaked, via SamMobile. These wouldn't otherwise be noteworthy, as they look almost identical to phone renders we've already seen (and the Galaxy S21 cases for that matter), but the design of them shows a Galaxy S22 screen feature that not everyone will be happy with.
This feature is a flat-edge display. Previous flagship Samsung phones used curved-edge screens for a few generations up until the design element was dropped on the Galaxy S21, and it seems Samsung is sticking with its choice for the S22 and S22 Plus.
The leaked cases show edges that go all the way to the front, whereas cases for curved-side screens typically only cover part of the phone's frame.
Note we're talking about the standard and Plus models - the Ultra devices have always had curved-edge displays, and if the case leak is anything to go by, that's not changing.
So it seems likely that the Galaxy S22 series is sticking with the design of its predecessors, with screens that are totally flat even up to the sides, and Samsung hasn't decided to revert back to the curvy mode of design.
Analysis: good or bad?
Curved-edge displays typically prove rather divisive for flagship phones.
On one hand, mobiles with the feature are comfortable to hold, and the curving glass adds a level of premium elegance that you just don't get with a 'standard' smartphone.
On the other hand, curved-edge displays are very easy to press with your palm, so it's easy to accidentally select things you don't mean to when holding the phone. They make the mobile more fragile too, especially since cases cover less of the phone as a result.
So some people like the feature and others don't, and it makes sense for Samsung to cater to both audiences.
However, we typically see curvy screens saved for premium phones, and it sounds like the Xiaomi 12 and OnePlus 10 families, two contemporary rivals for the Galaxy S22, could go all-in on the rounded-glass design.
Since Samsung's only premium phone with a curved-edge screen could well be the Ultra model, which we're expecting to have a high price, people who want a phone with top-end specs and a premium design, but not a huge price tag, will find Samsung doesn't offer them what they need.
The original AirPods Pro are among the best wireless earbuds you can buy, with immersive Spatial Audio support, active noise cancellation, and fantastic integration with the wider Apple ecosystem.
However, the next version of these buds are now rumored to come with a range of significant upgrades: we’ve heard about everything from codewords that can control the active noise cancellation to blood oxygen monitors embedded in the earbuds themselves, but how likely are such futuristic features?
Since the AirPods Pro 2 are expected to launch later this year (that’s according to respected analysts like Ming-Chi Kuo), perhaps the more fanciful ideas are just too futuristic - so let’s analyze the intriguing features we’ve heard about so far.
Noise cancellation codewords
(Image credit: Apple)
The most recent rumor circulating about the AirPods Pro 2 is that they’ll allow specific codewords and voices to ‘break through’ their active noise cancellation settings.
Spotted by Apple Insider, a new patent application called ‘Interrupt for noise-cancelling audio devices’ describes a new feature that’s designed to stop you from missing out on important conversations while active noise cancellation is switched on.
As explained in the patent, a user “may desire to be interrupted by pre-designation contacts… or by a person who speaks a designated keyword to the user”.
So, if your partner is shouting your name to say that dinner’s ready, future AirPods could turn off the active noise cancellation, enter Transparency mode, or turn off your music to allow you to hear them.
To stop any person from interrupting your music, you’d be able to pre-approve contacts known to you and your devices – and to determine whether you’re the one being addressed by these contacts, the AirPods could analyse the volume of their voice and how long it takes for their voice to reach you.
The patent also describes how this could work with codewords as well as voices, so you could train your AirPods to recognize when any person says your name, and turn off your noise cancellation accordingly.
How likely is this to happen? As with any patent, there’s no guarantee that the technology described here will actually make an appearance, let alone in a new version of the AirPods Pro that’s expected to launch in a few months.
This feature would be useful, and it certainly isn’t outside the realms of possibility that your iPhone could identify different voices and switch off your AirPods’ noise cancellation.
After all, Siri can recognize up to six different voices on the Apple HomePod and HomePod mini, and tailor its responses accordingly.
The technology required to make this feature work is definitely present – but whether it would be available at the time of the AirPods Pro 2 launch is another question. Apple has previously updated accessibility features on its AirPods range of products well after their launch dates, and we could see something similar happening here, perhaps to coincide with a new version of iOS.
Blood oxygen monitoring
The Blood Oxygen app on the Apple Watch 6.(Image credit: Apple)
The rumor that future AirPods will be able to monitor your blood oxygen levels is something we’ve been hearing about for some time now.
A 2020 leak from LeaksApplePro claimed that the AirPods Pro 2 will specifically come with ambient light sensors, backing up a previous report by DigiTimes that said future AirPods will use ambient light sensors to take biometric measurements – potentially for monitoring blood oxygen levels, as seen in the Apple Watch 6.
This could work like the ear-based clip-on pulse oximeters used in hospitals, which shine light through the earlobe to detect the level of oxygen in a patient’s bloodstream.
This would allow the AirPods Pro 2 to collect fitness data and measure it over time – useful, if you’re using the earbuds as running headphones – and perhaps even monitor conditions that cause shortness of breath and low oxygen levels.
How likely is this to happen? We don’t think this one is very likely. The current AirPods Pro don’t rest on the earlobe in a way that would work for a blood oximeter, and integrating an actual ear clip would bring a drastic design change to the AirPods Pro. Of all the earbuds that this feature could come to, the Powerbeats Pro are more likely, since they hook around the ear and have more contact with the skin.
Saying that, the technology to do this does exist. In 2019, FreeWavs completed a successful crowdfunding campaign for a pair of fitness earbuds that can measure your blood oxygen levels, as well as other biometric data. However, the product never came to market, with the company citing issues with accurately detecting blood oxygen levels, and even contemplating releasing a version of the earbuds without this feature to appease its backers.
Apple is a much larger company though, and if any brand could make this feature work, it’s Apple. We’ve already seen Apple integrate a pulse oximeter into the Apple Watch 6, which offers the ability to measure blood oxygen levels. As Apple says, measurements taken with the Blood Oxygen app on the Apple Watch 6 are “not intended for medical use and are only designed for general fitness and wellness purposes”, which makes it ripe for fitness-focused headphones.
Gesture controls
(Image credit: Shutterstock)
Like all of the futuristic AirPods Pro 2 features we’ve heard about, gesture controls is a rumor borne out of patents awarded to Apple.
The first was a 2020 patent that describes the ability to control a pair of true wireless earbuds with ‘in-air’ gestures – for example, hovering a hand over the AirPods to turn off the noise cancellation or pause your music. This feature would use capacitive sensors to detect the proximity of the user to the AirPods.
More recently, Apple filed a patent for even more ‘out there’ gestures, describing earbuds that could be controlled by touching your face, shaking your head, and clicking your teeth together. These actions wouldn’t even be limited to the user’s own body, with the ability to control the earbuds by touching another object – for instance, tapping a table or squeezing the arm of another person.
How likely is this to happen? Cupping an ear over your earbuds to pause active noise cancellation or your music doesn’t seem that far fetched, and we can see Apple implementing this with a next-gen pair of AirPods Pro.
However, we can’t see people using the more flamboyant gestures in public, and it would be very difficult for Apple to ensure these gestures are accurately picked up by the earbuds. We’ve seen gesture controls implemented in true wireless earbuds such as the TicPods 2 Pro, which allow you to accept calls by nodding your head, and reject them by shaking it. However, we have found that such controls rarely work well, if at all.
It’s rare for Apple to take these kinds of risks with its products, preferring to let other companies experiment with new technologies before implementing them itself. Apple products are known for working well and for delivering ease of use, and the company is unlikely to take a gamble on gesture controls if it isn’t confident that they’ll work every time.
What’s likely to actually change in the AirPods Pro 2?
(Image credit: Apple)
The rumored features that are most likely to come with the AirPods Pro 2 are less headline-grabbing than blood oxygen monitors and codewords, but they’re interesting all the same.
We can expect some improvements to the active noise cancellation technology; the AirPods Pro were released in 2019 and the technology has moved on since then, with models such as the Bose QuietComfort Earbuds offering near-silence with the ANC feature switched on. While Apple’s noise-cancelling earbuds do block out a good amount of ambient sound (especially if its a constant sound, like a rumbling train), you’re still able to hear things like music playing in a shared office.
We’re also hoping to see some improvements to the audio performance of the AirPods Pro, and we’d love for Apple to include an adjustable EQ so users could tweak the sound to their liking. This would let you dig into the different frequency bands - perhaps boosting the bass when you’re exercising to power you through your workout, or increasing the trebles and mids so voices sound clearer on podcasts.
Support for lossless audio and hi-res streaming is a possibility, too, as Becky Roberts, Hi-Fi and Audio Editor for What Hi-Fi? explains: “The AirPods 2 will likely be the first Apple headphones to launch since Apple Music went lossless and hi-res, and Apple will no doubt be keen for its headphone hardware and music software to be on the same page for audio quality, as is the case with its spatial audio technology.”
Will the AirPods Pro 2 come with support for Lossless Audio to tie in with Apple Music?(Image credit: Apple)
It’s not as simple as including support for a hi-res audio codec though. “The barrier to truly lossless support for headphones like the AirPods that rely solely on Bluetooth connection (i.e cannot be wired) lies in whether Apple can raise the ceiling of Bluetooth transmission quality, or find an alternative method to send high-quality music wirelessly to headphones.”
“We may be looking at an AirPods model further down the line for that,” she says. In any case, it’s clearly an issue that Apple is looking into. In an interview with What Hi-Fi?, Apple's VP of Acoustics, Gary Geaves said that “there’s a number of tricks we can play to maximise or get around some of the limits of Bluetooth,” but that “it’s fair to say that we would like more bandwidth”.
Truly lossless streaming, that doesn’t heavily compress audio files and reduce the detail in your music could be made possible with Qualcomm’s aptX Lossless codec, which can deliver CD-quality streams over Bluetooth, and is expected to start coming to headphones later this year.
Without the need to squeeze all the detail out of your music so that the files can be transmitted wirelessly, this codec should deliver a sound that closely replicates the quality that the musicians and engineers were working with in the studio at the time of recording.
Whether this technology will come to the AirPods Pro 2 remains to be seen - and as Roberts said, we still might not get fully lossless AirPods in 2022.
It’s also possible that the AirPods Pro will see a dramatic redesign in 2022, with Apple getting rid of the protruding ear stems that make its AirPods earbuds so instantly recognizable.
The AirPods Pro could lose their iconic stems.(Image credit: TechRadar)
Of course, there’s no guarantee that any of these rumors will be proven right, or that the AirPods Pro 2 will even be released in 2022. Apple hasn’t confirmed that it’s working on the next generation of its noise-cancelling earbuds, and is very unlikely to do so before an official launch
Still, we’re pretty confident that the company will upgrade the AirPods Pro before the year is out. Three years after their release, the AirPods Pro are still a good pair of true wireless earbuds, but they certainly aren’t the best you can buy. Apple will want to change that by releasing a pair of earbuds that can compete with class-leading models from big competitors such as Sony, Bose and Sennheiser - and by focusing on more futuristic features, it could detract from areas it’s less adept in, like audio quality and noise cancellation.
Saying that, we daresay Apple will stay true to form and work on perfecting the less headline-grabbing features of the AirPods Pro before taking a risk on emerging technologies like biometric sensors, voice recognition, and gesture controls.
For a long time, it looked like DJI's affordable consumer drones would fly free from serious competition. But that all changed in September 2021 when Autel announced four upcoming drones that represent serious competition for DJI's successful, entry-level designs.
The Autel Evo Nano and Nano+ are designed to take on the excellent DJI Mini 2, while the Evo Lite and Lite+ models have landed to take a bite out of the popular DJI Air 2S.
Interestingly, the specification for the Evo Lite series looks like it was taken directly from an existing Air 2S owner’s wishlist – in fact, it could be a compilation of things we might well see in the DJI Air 3, if and when DJI releases that drone.
The Autel Evo Lite+ was designed to exceed or match the DJI Air 2S across the board, sporting almost everything in the existing DJI Air 2S, but with some features that go beyond that design and even compete with the Mavic 3.
But before we compare the drones and delve into the specifications, let’s start with the inevitable abuse that owning a Lite+ will unleash on your bank account.
With components in short supply and the cost of chip fabrication rising, the Lite+ was always going to top the Air 2S on price. But it's possible that the Air 2S' price could also rise, and the Air 3 will almost certainly cost more when it does appear.
At the time of writing, the Lite+ costs $1,349 / £1,129 / AU $2,499 for its standard package with a single battery and a single set of replacement blades. For the Premium bundle, with three batteries, lots of props, a three-battery charger, soft bag, and a few other goodies, that outlay increases to $1,649 / £1,399 / AU $2,999.
(Image credit: Future)
That compares unfavorably with the DJI Air 2S, with that drone costing $999 / £899 / / AU $1699 and its Fly More Combo with the extra batteries setting you back $1,299 / £1,169 / AU $2,099.
Overall, the Autel Evo Lite+ costs around $350 / £230 more, irrespective of which bundle you buy. That's a pretty substantial increase of about 30% over the Air 2S, which takes it to a level that's likely beyond the budget of many hobbyist fliers.
Autel Evo Lite+ vs DJI Air 2S: Design
While these drones look remarkably similar in layout and design, the Lite+ is altogether a larger drone that measures 210×123×95mm when folded and 427×384×95mm when the arms are deployed. By contrast, the DJI Air 2S is just 180×97×77 mm folded and 183×253×77 mm when unfolded. This scale makes the Lite+ marginally bigger than even the DJI Mavic 3.
As both of these drones are above the 250g threshold, it might not matter by exactly how much, but the take-off weight of the Air 2S is only 595g, whereas the Lite+ is significantly heavier at 835g.
(Image credit: Autel and DJI)
That might immediately look like a win for the Air 2S until you realise that the extra weight in the Lite+ is allocated chiefly to a larger battery, enabling a longer flight time of 40 mins over 32 mins on the DJI drone and superior wind speed resistance. It can also climb much more rapidly, reaching the legal height limit of 400ft in just 15 seconds.
Both drones have obstacle avoidance, an FFC transmission range of 12km and the ability to record up 5.4K resolution video up to 30 fps. But what truly divides these drones is the camera technology, as the Autel Evo Lite+ has a much more modern sensor, optics and image processing technology.
The Lite+ comes in three colors, including the signature Autel Orange, compared to the single grey color scheme that DJI has on the Air 2S.
Autel Evo Lite+ vs DJI Air 2S: Cameras
Sensor size is all about collecting as much light as possible to produce the best representation when stills or video are captured. Both drones have a 20MP 1-inch CMOS sensor with 2.4μm pixel size, but the Air 2S has a fixed f/2.8 aperture.
One feature that the DJI Mavic 2 Pro offered that's missing on the DJI Air 2S was a camera with a variable aperture. This is something that's offered by the Evo Lite+, with its aperture adjustable from f/2.8 to f11.
This allows much greater management of the light that's entering the camera, without the need for ND filters – and even greater scope if ND filters are used.
(Image credit: Autel and DJI)
The camera field of view on both drones is pretty similar, at 88 degrees on the Air 2S and 82 degrees on the Lite+.
But the Lite+ sensor also has many other enhancements that enable it to capture relatively noise-free content in even very low light conditions. Whereas the video ISO for both drones is capped at ISO 6400 for standard scenes, a special night mode on the Lite+ allows the ISO to increase to an incredible ISO 48000. This gives the Lite+ the edge when shooting in low-light conditions, and it's also better able to capture realistic colors in those situations.
Where the Air 2S has an advantage is that it can capture content in a D-Log format that provides plenty of scope for adjustment in post-processing – this is something that Autel has promised in a future firmware release for the Lite+, but it isn’t available yet.
Autel Evo Lite+ vs DJI Air 2S: Video modes
While the Lite+ has ‘6K’ emblazoned on its camera, it offers an almost identical maximum resolution and modes as the Air 2S. The best resolution of the Lite+ is 5472x3076, whereas the Air 2S has two extra vertical pixel lines at 5472×3078.
At that resolution, both offer 30fps, and they can increase this to 60fps by trading down to 4K, and up to 120fps by going down to 1080p.
The maximum bitrate on offer is 150Mbps on the Air 2S and 120Mbps on the Lite+. This means there's slightly less compression on the DJI drone's video, though not enough to make a dramatic difference in quality.
Autel has promised HDR modes for 4K and lower resolution video in a future update, and that is something that DJI doesn’t offer or, at the time of writing, intends to add.
Both drones support H.264/MPEG-4 AVC and H.265/HEVC encoding, but the Lite+ has only 8-bit color representation where the Air 2S has the option to shoot 10-bit Dlog-M.
(Image credit: Autel and DJI)
The biggest difference between these two cameras becomes evident at night, as the Air 2S has a maximum ISO of 6400 in manual video capture and only 1600 if you use Dlog-M.
For automatic video and still image capture, the Lite+ can match the Air 2S' ISO 6400 option, but using the Night scene mode boosts that sensitivity to ISO 48000. It also has special a moonlight processing mode to reduce noise impact when recording at these very high ISO levels.
Still images on the Lite+ can be shot in 10-bit DNG, showing the sensor can work with the extended contrast of this bit depth, and the maximum resolution is 5472x3648, identical to that of the Air 2S.
Overall, the Lite+ is a good representation of how camera technology has evolved since the Air 2S was launched, and its video quality is closer to that of the Mavic 3.
Autel Evo Lite+ vs DJI Air 2S: Performance
While the top speed of both drones is a similar 19m/s, the Air 2S has a quoted wind resistance of 10.7 m/s compared to the 16.5 m/s that the Lite+ can allegedly handle.
That performance level exceeds the 12 m/s of the Mavic 3 and hints at just how much power the Lite+ can call on when required. This raw grunt is apparent in ascent speeds, where it can rise at 8 m/s, a full 2 m/s faster than the Air 2S.
The flipside of this feature is that, being heavier, Autel prefers to avoid momentum taking control in rapid descents, and the Lite+ only comes down at 4 m/s, 2 m/s less than the Air 2S.
Overall, the Lite+ is better for getting up to altitude rapidly, but the Air 2S has a slight edge if you need to get the drone back on the ground quickly.
One good reason you might want to do that is a low battery, and with only a maximum of 3750mAh on the Air 2S and a flight time of just 31 minutes, that’s a plausible scenario.
The Lite+ has a relatively massive 6175mAh battery, and even though it carries an extra 240g (about the same as strapping a DJI Mini 2 to the Air 2S), it can remain airborne for an impressive 40 minutes.
(Image credit: Autel and DJI)
Many DJI Air 2S pilots would be thinking about recovery at around the 25-minute mark, but the Autel drone flyer has at least another ten minutes of operational time ahead. That’s plenty of extra time to take another go at achieving that unique shot or trying something new.
The differences between DJI’s Ocusync 3.0 and Autel’s SkyLink transmission technology are subtle. For the majority who operate within the visual range limits imposed by most countries, they won’t experience disconnections even where there are interfering signals.
Technically, Skylink is rated for 12km FCC and 6km CE, whereas Ocusync 3.0 is 12km FCC and 8km CE. Flying in a CE environment, we didn’t notice any dramatic disadvantage for the Autel drone.
What we can confirm is that Skylink is far superior to Ocusync 2.0 as seen on the DJI Mini 2 and original DJI Mavic Air 2. It's very easy to fly out to the 500m limit, even in a cluttered location and behind buildings, without ever losing the video feed or control.
One aspect of the Autel drone that we liked was that the transmission technology provides a 2.7K resolution live video stream back to the Sky app when the drone is within 1km, whereas all the DJI drones can only manage 1080p at best. The clarity of this image makes the Lite+ easier to work with when operating around tree branches and wires that the obstacle avoidance might not detect.
Autel Evo Lite+ vs DJI Air 2S: Obstacle avoidance and GPS
The obstacle avoidance system on these drones is very similar, offering forward, rear and below sensors, but lacking lateral vision. The Air 2S also has additional upward-looking sensors, making it suitable for those who like to fly under structures such as bridges.
While it isn’t comparable, the forward sensors of the Lite+ have a greater vertical angle than those on the Air 2S, enabling it to see things above it to a degree. Still, neither of these drones have the level of avoidance we’ve seen on the Skydio 2, but it might avoid an expensive accident, especially for those new to the hobby.
In both, obstacle avoidance is disabled in 'sport' mode automatically, and it won’t work in low light conditions. For night landings, both have an LED that illuminates the ground below the drone to help downward-looking sensors see during this flight phase.
Currently, the Lite+ employs a system that inhibits the user from flying into obstacles that the drone senses, though it won’t autonomously fly around them, whereas the Air 2S has the option to self-navigate in a limited way. We believe Autel intends to add this functionality, most likely when it delivers dynamic tracking to the Lite+ shortly.
For geographic location accuracy, the Lite+ can call on GPS, GLONASS and Galileo, the same technologies that the Air 2S uses. One extra feature on the Air 2S that isn't available on the Lite+ is AirSense, a technology to detect other aircraft and helicopters while flying.
(Image credit: Mark Pickavance)
Autel Evo Lite+ vs DJI Air 2S: Early verdict
Like the recent DJI Mavic 3, the Autel Evo Lite+ has come to market with a few features still to be added, but fewer than the Mavic 3 had missing before its recent firmware update.
By comparison, the DJI Mavic Air 2 has been around for much longer, having first appeared in April 2020, before being updated to the DJI Air 2S a year later. This means the Air 2S is a more mature piece of technology with all its functionality complete.
DJI recently released an SDK for the Air 2S, enabling third-party applications like Litchi and Rainbow to operate the drone. Autel is also looking into providing an SDK, and we hope it provides one for the Lite+ at some point.
That said, the Lite+ has an attractive performance envelope already, and it will only get better as Autel delivers new firmware releases. A fantastic camera with enhanced low light capabilities and a variable aperture lens makes it ideal for those who take drone cinematography seriously.
When the extended flying time of the Lite+ is factored in, DJI now has some serious competition in the prosumer slice of the camera drone market. After Autel has added a flat profile shooting mode and 4K HDR capture, the Evo Lite+ could become the go-to solution for those unwilling to embrace the eye-watering cost of the DJI Mavic 3.
However, the Lite+ does cost a significant amount more than the Air 2S, and for those with a limited budget, that drone is still a great performer.
Check out our guide to the best drones you can buy
from TechRadar - All the latest technology news https://ift.tt/7cmPuys0n
0
coment�rios:
via TechRadar - All the latest technology news https://ift.tt/UAIHiaKqt
After the truly tiny update that was iOS 15.3, we're now learning about iOS 15.4, and thankfully this already looks to be a much, much bigger update for Apple's operating system.
The first beta is out now for developers, and with it comes news of several big included features, such as the long-awaited Universal Control, Face ID functionality with a mask, and more.
Below we've detailed everything we know about iOS 15.4, including when it's likely to launch, and we'll be updating this article when we hear more, so check back soon.
Cut to the chase
What is it? The latest iOS release
When is it out? The beta is out now, expect the finished version before April
How much will it cost? It's free
iOS 15.4 release date and compatibility
iOS 15.4 is already available, but only in beta form, and only for developers. While you don't technically have to be a developer to grab this version, we'd recommend at least waiting for the public beta, and if you want it to be bug-free then you should wait for the finished release.
We're generally seeing roughly a four to six week gap between new iOS versions, which means that given iOS 15.3 landed on January 26, we'll probably see the finished version of iOS 15.4 sometime between late February and mid-March, but we'd guess more towards the latter, especially as this looks like quite a big update.
As for compatibility, it's exactly the same as every other version of iOS 15, meaning that if you're on iOS 15 or above you'll be able to get iOS 15.4 as well. Specifically, that's all handsets from the iPhone 6S onwards, including the iPhone SE (2020) and the original iPhone SE, plus the iPod touch (7th gen).
(Image credit: Apple)
iOS 15.4 features
Thanks to a beta we know many of the features that will probably arrive in iOS 15.4. However, it's possible that there might be other features too, or that some of these won't ultimately make the cut.
Face ID with a mask
Well this is new 🤔 (iOS 15.4 Beta 1) pic.twitter.com/MSe7hmPGlRJanuary 27, 2022
See more
The Covid-19 pandemic presented a problem for iPhones, as with the whole world suddenly wearing masks, Face ID wasn't always viable. Apple addressed this problem a while back by allowing your iPhone to unlock if you were wearing an Apple Watch, but with iOS 15.4 it seems to have properly fixed the issue.
The iOS 15.4 beta allows you to set Face ID to work even when you're wearing a mask, by having it just scan the visible parts of your face, such as your eyes.
It warns that this is less accurate, and we'd assume also less secure, but it's a way to properly use Face ID with a mask on. It's also optional, so if you'd rather keep doing things the current way, you can disable this feature.
Universal Control
(Image credit: Apple)
Universal Control is technically more of an iPadOS 15.4 feature than an iPhone one, as it allows users to connect an iPad to a Mac and use a single mouse and keyboard across both devices, with the iPad’s display being like an extension of the Mac’s.
This feature has been a long time coming, as we first heard about it back at WWDC 2021, but it's finally arrived in the iPadOS 15.4 beta.
New emoji
(Image credit: Emojipedia / Apple)
If, somehow, you feel that there just aren't enough emoji yet, then iOS 15.4 could help, as the beta includes 37 new ones, along with 75 skin tone variations for better inclusivity.
New emoji, some of which you can see above, include a biting lip, a melting face, heart hands, and many more.
Notes in iCloud Keychain
If you use iCloud Keychain then you'll now be able to add notes alongside any password. This is a fairly standard feature of password managers, so it's been a long time coming and is good to see.
Apple Card widget
If you use Apple Card, then with iOS 15.4 you'll be able to add a widget for it to the Today view. This will display your balance, your available funds, and your daily spending across various categories.
Digital IDs in the Wallet app
(Image credit: Apple)
Before we move on to smaller features, here's a big feature that there’s not actually any sign of in iOS 15.4 yet, but which might be included, since we know it’s being worked on.
This feature would allow US users to add their driver’s license or state ID to the Wallet app, and it would then be accepted at TSA checkpoints in select airports, with retailers, events and venues eventually expected to add support for these digital IDs too.
However, even once this feature is added, the roll out looks likely to be slow. It’s going to land on a state-by-state basis in the US (with Arizona, Georgia, Connecticut, Iowa, Kentucky, Maryland, Oklahoma, and Utah looking to be first in line), and there’s no word on exactly if or when the feature will expand to other countries.
Other features
Beyond the features above, all sorts of smaller tweaks and improvements have also been found in iOS 15.4.
These include the ability to turn off notifications for Personal Automations in Shortcuts if you don't want to be alerted about them, set up custom email domains directly from iCloud Mail on the iPhone (if you have an iCloud Plus subscription), activate SharePlay from the Share Sheet, and customize the left and right corner swipe gestures in the Notes app.
You can also choose whether to show still frames or poster art in the Up Next section of the TV app, use your iPhone to sign in to passkey-compatible websites and apps on your iPad or Mac, and make use of what Apple describes as 'new DualSense adaptive trigger firmware features' when you've paired Sony's latest controller with your phone.
Plus, those in the EU can now add their Covid vaccine cards to the Wallet app, and there's also evidence in the iOS 15.4 beta that Apple is working on a 'Cosmetic Scan' feature, which would be used to check your iPhone for damage when trading it in.
Bug fixes
New versions of iOS almost always come with bug fixes, and iOS 15.4 is no exception. One such fix is that third-party apps will now display animations at 120Hz when using the iPhone 13 Pro or iPhone 13 Pro Max, which in some cases they weren't doing previously.
We'd expect other bugs have been fixed too, but we're not sure which ones.
With so many cooking functions, it seems there’s no end to the delicious meals that can be created in one of the best Instant Pots. They’re great for slow-cooked tender meat or fast pressure-cooked curries, but more often than not, we tend to dream of mouthwatering savory foods when thinking about what to cook next in this clever kitchen gadget.
An Instant Pot is one of the most versatile kitchen appliances around and with an army of fans worldwide, there are thousands of recipes online created especially for this popular multi-cooker. In fact, we've had great success cooking everything from mashed potato to hard-boiled eggs in an Instant Pot.
When I saw just how many cake recipes were on the Instant Pot website and app, I got to thinking, can you really bake a cake in one of these multicookers? Is an Instant Pot the answer to making bakes worth of the contenders on the Great British Baking Show or, if you’re in the UK the Great British Bake Off?
Best Instant Pot deals
Read on to discover what happened when we used an Instant Pot to bake cake and cookies, or if you’ve already decided you want to invest in one of these multicookers, check out the best prices right now:
How do you cook cakes and cookies in an Instant Pot?
You don’t need an Instant Pot with an air fry lid to make cakes, but I suspect you’ll get better results that way. In a classic Instant Pot without air fry capabilities, the majority of cake recipes utilize the pressure cook function.
Once you’ve made the cake batter and filled a cake pan, it then has to be covered with foil. This stops moisture from getting into the cake and affecting your bake. By adding water to the cooking pot and sitting the cake pan on the trivet, it’s kept away from the direct heat at the base of the pot and instead cooks gently in the pressurized heat.
Most of the recipes I tried, call for a 7 inch/ 18cm round cake pan, fortunately, I had one this size. However my 6 quart/ 6 liter Instant Pot was only just big enough for the pan. So while I could just about ease it in, removing it from the hot steamy pot at the end of cooking was tricky, to say the least. It involved the use of several kitchen utensils in an attempt to lever it out. So if you’re serious about perfecting cakes in an Instant Pot I’d highly recommend buying a silicone pressure cooker bakeware sling, which sits in the bottom of the Instant Pot and has handles that enable you to lift out the cake tin with ease.
(Image credit: TechRadar)
So, how did the bakes turn out?
I envisioned impossibly moist and light cakes when I started this baking adventure. After all, if there’s no oven then the cake can’t burn or dry out. And it’s true, none of the cakes I made were burnt or overly dry, they just had other problems.
First up, let me tell you about my most successful creation, the fudgy chocolate cake. After following the recipe and pressure cooking for the required 30 minutes it didn’t look great. The top was bumpy and it didn’t appear to have risen much either. And while it would be a stretch to describe it as a cake, this chocolate treat actually tasted delicious. It was rich, dense, and fudgy with a pleasing brownie texture and a rich chocolate flavor, and I enjoyed every mouthful. But let’s be clear, cakes should be light and fluffy, which this was not.
Going into my second bake I was optimistic and after the rich chocolate cake, I landed on a recipe for what looked like a fresh and light orange olive oil cake. Again, I followed the recipe and pressure cooked it for 35 minutes, but this one ended up being the worst cake I made in the Instant Pot. It didn’t rise at all and what came out of the pan was very dense, rubbery, and completely inedible.
(Image credit: TechRadar)
At this point, I didn’t know what to expect from the third cake. This time I tried one of my all-time favorites, a carrot cake, and had high hopes for a delicious bake. At 65 minutes, the cooking time for this one was double that of the previous two cakes and I wondered if this would be the key to creating the perfect cake. And the finished cake did actually rise much more than the previous two, it certainly looked far more like a traditional cake. But sadly it just wasn’t the real deal, it was denser and chewier than a carrot cake should be. I was left wishing I’d baked it in the oven instead, for a lighter springier result.
There aren’t many cookie recipes that don’t require the use of an air fry lid, but eventually, I found one for oatmeal raisin cookie which looked worth a try. Like the cakes, it gets cooked in a foil-covered cake pan using the pressure cook function. The end result did look like a giant cookie, but that’s where the similarities ended. It had the texture of a dry flat cake which although edible, was very disappointing and certainly didn’t feel like a treat.
I’d love to tell you that Instant Pot is the answer to all of your baking woes, but this experience showed me you just can’t create light and fluffy bakes in a pressure cooker. Instant Pot is a fantastic appliance for creating so many tasty dishes, but let’s face it, even die-hard Instant Pot fans have to admit that it can’t be good at everything.
Love or loathe them, Nick Kyrgios and Thanis Kokkinakis have put doubles tennis on the map. Their brash, clownish style has worked the Melbourne crowd into riotous states and it's going to be a wild Saturday night at the Rod Laver Arena as they face fellow Aussies Max Purcell and Matt Ebden. Here's how to get a Kyrgios & Kokkinakis vs Purcell & Ebdon live stream wherever you are - including ways to watch Australian Open tennis absolutely FREE.
Watch the men's doubles final free on9Now(may require aVPN)
Kyrgios & Kokkinakis vs Purcell & Ebdon live stream
Dates: Saturday, January 29
Time (estimated): 9pm AEDT / 10am GMT / 5am ET / 2am PT
It's the first all-Aussie men's doubles final since 1980 and, to get here, these teams have had to beat a seeded pair at every stage of the tournament from the second round onwards, most notably top seeds Nikola Mektić and Mate Pavić, who fell to Kyrgios and Kokkinakis early on, and No.2 seeds Rajeev Ram and Joe Salisbury, who Purcell and Ebden beat in straight sets in the semis.
Purcell has been in Kyrgios' and Kokkinakis' shoes before, reaching the Aussie Open final as a wildcard two years ago, while Ebden lifted the mixed doubles title here in 2013.
The Aussie crowd will doubtless be delighted at a guaranteed win but you'd be brave to bet against Kyrgios with that wall of noise at his back. This is going to be box office. Watch all the drama unfold by following a Kyrgios & Kokkinakis vs Purcell & Ebdon live stream at the Australian Open 2022.
Kyrgios & Kokkinakis vs Purcell & Ebdon is expected to get underway at around 9pm AEDT on Saturday night, taking place after Barty vs Collins.
Aussie tennis fans can tune in without paying a penny thanks to Channel 9 and 9Gem, which are FREE to watch.
That means you can also fire up a Kyrgios & Kokkinakis vs Purcell & Ebdon live stream on the 9Now streaming service, which is completely free to use too, and compatible with most smart devices.
If you're currently out of Australia but want a slice of that free coverage, you'll need to get yourself a VPN as per the instructions above.
How to live stream Australian Open from outside your country
For broadcast and streaming details in more tennis-mad countries like the UK, US, Canada and New Zealand, just scroll down the page - everything you need to know is there, including estimated start times and broadcast details.
But if you try to watch your domestic coverage from anywhere outside your home country, you'll soon find a problem - geo-blocking. That's where the broadcaster prevents you from watching your usual feed from abroad. It's a common problem for sports fans all over the world.
By downloading and installing a VPN, you can effectively trick your computer into thinking that it's back at home.
Use a VPN to watch Australian Open from anywhere
ExpressVPN - get the world's best VPN We've put all the major VPNs through their paces and we rate ExpressVPN as our top pick, thanks to its speed, ease of use and strong security features. It's also compatible with just about any streaming device out there, including Amazon Fire TV Stick, Apple TV, Xbox and PlayStation, as well as Android and Apple mobiles.
Sign up for an annual plan now and get an extra 3 months absolutely FREE. And if you change your mind within the first 30 days, let them know and they'll give you your money back without a quibble.
Once you have it, you simply need to turn your VPN on, select a server in a country that's showing the game and go to the relevant streaming service's site or app - easy!
US: Watch a men's doubles final live stream
Tennis fans based in the US have a late night (or super early morning) ahead, as Kyrgios & Kokkinakis vs Purcell & Ebdon is expected to start at around 5am ET / 2am PT on Friday night/Saturday morning - straight after Barty vs Collins.
ESPN Plus is the best place to watch Kyrgios & Kokkinakis vs Purcell & Ebdon in the US.
ESPN+ only costs $6.99 per month and allows you to watch online as well as via its suite of apps for mobile, tablet, laptop and most other smart devices. It's $69.99 for 12 months if you're happy to commit for the year.
Those timings also apply in Canada, where tennis fans have a sleepy night in store. Kyrgios & Kokkinakis vs Purcell & Ebdon is expected to start at around 5am ET / 2am PT on Friday night/Saturday morning, with timings dependant on the Barty vs Collins match.
In Canada, you can watch Kyrgios & Kokkinakis vs Purcell & Ebdon on TSN for English-language coverage, and RDS for French-language coverage.
If you get them as part of your cable deal, then you'll just be able to log in with the details of your provider and get access to an Australian Open live stream.
If you don't have cable, then you can subscribe to TSN or RDS on a streaming-only basis from CA$7.99 a day or (much better value) $19.99 a month.
Tennis fans in the UK will be able to watch Kyrgios & Kokkinakis vs Purcell & Ebdon from around 10am GMT on Saturday morning, right after Barty vs Collins.
Kyrgios & Kokkinakis vs Purcell & Ebdon is being shown on streaming service Discovery+, which you can subscribe to for £6.99 per month or just £29.99 for your first year - down from £59.99 for a limited time! Better still, there's a 7-day FREE trial for new users.
The platform is brimming with live sports, including big events like the upcoming Winter Olympics, snooker and Formula E, and lots of niche and extreme stuff too, such as snowboarding, swimming, and canoeing.
If you’re out of the UK but still want to tune in, make sure you install a VPN so you can continue accessing UK streaming services from anywhere.
New Zealand: watch a men's doubles final live stream
Live Australian Open final coverage in New Zealand comes courtesy of Sky Sport, which is available as part of a range of pay TV packages.
Kyrgios & Kokkinakis vs Purcell & Ebdon is expected to start at around 11pm NZDT on Saturday night, following the Barty vs Collins match.
Sky Sport subscribers can watch online using the country's Sky Go service, while cord-cutters and anyone else can try the Sky Sport Now streaming-only platform - where a weekly pass costs $19.99, and a monthly pass costs $39.99 after a 7-day free trial.
Anyone in New Zealand from abroad or vice-versa can use the VPN route outlined earlier to access their preferred coverage just like they would at home.
from TechRadar - All the latest technology news https://bit.ly/3o7CZwW
0 coment�rios: